The Easiest Remote Ever. Controls virtually any television. It's easy to use, operate, program, touch, see, handle, and carry. Has learning ability and back lighting. Requires 2 AAA batteries (not included).

Programming instructions:
Quick Setup Guide
Confirm first
Your remote control has two fresh AAA batteries properly installed.
To use the learning mode, you will need another remote that currently works with your TV. Ensure that it has
working batteries.
Quick Search
The fast search function will search through common TV remote codes incrementally as you press the 'CH+' button.
This method of programming your remote will not work with all TVs.
1. Ensure that your TV is powered on.
2. Press and hold the 'Mute' and 'CH+' buttons for five seconds. The indicator light next to the 'Power' button will
turn on. Release both buttons.
3. Press the 'CH+' button. Each time you press it, it will cycle to the next TV remote code.
4. When the channel on your TV changes, you have reached the correct code. Press the 'Mute' button to save it.
Learning Mode
The DT-R08 has the ability to learn codes from other remotes.
1. Find a remote that works with your TV.
2. Press and hold the 'CH+' and 'VOL+' buttons for five seconds. The indicator light next to the 'Power' button will
turn on. Release both buttons.
3. Point the front of the DT-R08 at the front of your teaching remote. Keep both remotes within 2-3 inches of each
other.
4. Press a function key on the teaching remote. The indicator light on the DT-R08 will flash. Press and hold the
corresponding key on the DT-R08 for two seconds. The indicator light will flash three times, then remain lit.
5. Repeat step 4 for any function you wish the DT-R08 to learn.
6. When you are finished, press and hold the 'CH+' and 'VOL-'. The indicator light will go dark and the codes will be
saved.
Note: During the learning process, if no key is pressed within 25 seconds, the learning process will exit without saving.
Reset to Default Setting
1. Press and hold the 'Power' and 'Mute' buttons for three seconds. The indicator light next to the 'Power' button
will turn on. Release both buttons.
2 . Pr ess th e ' Mute' button and release immediately. The indicator light will go out. The remote is reset.
Backlight Function
1. Press and hold the 'Mute' and 'CH-' buttons for five seconds. The indicator light next to the 'Power' button will
turn on. Release both buttons. The backlight will turn on.
2. Repeat step one to disable the backlight function.